RALLY RAID PRODUCTS
TRIUMPH SPEED 400 TUBED SPOKED WHEEL KIT
TRIUMPH SPEED 400 TUBED SPOKED WHEEL KIT
£1,100.00 GBP excl VAT
£0.00 excl VAT
£1,100.00 GBP excl VAT
Couldn't load pickup availability
Please read all information before ordering. Have a question ? Use our chat service below.
View full details
- OVERVIEW
- TECHNICAL SPECS
- IMPORTANT INFO
- FITTING & SUPPORT
17" front and 17" rear spoked TUBED wheel kit to fit TRIUMPH SPEED 400.
With the introduction of our new Gold-Anodised EXCEL TUBELESS spoked wheels, we are conscious that not everyone needs or wants to pay for such a high
specification premium spoked wheel-set, and may also prefer a more visually understated appearance.
We are therefore delighted to offer our same high-performance in-house designed 36 hole billet aluminium hubs, laced with the same heavy-duty Bulldog stainless steel
spokes, but in this instance to SMPro Black powder-coated rims which are designed to run traditional inner-tubes and tyres* - making for a much more affordable
package.
*Note you can still fit tubeless tyres if that is your preferred choice of course, but you
will need to run a tube inside them.
Hand-built here in the UK, our "SPEED" wheelset offers a strong and reliable spoked wheel upgrade to the Speed 400S.
Each custom-built wheel kit consists of:
Front wheel: 17” diameter x 3.00 wide, 36 spoke, SMPro aluminium rim, laced with heavy-duty stainless-steel spokes and nickel-plated brass nipples onto our own CNC
machined billet aluminium front hub.
Rear wheel: 17” diameter x 4.25 wide, 36 spoke, SMPro aluminium rim, laced with heavy-duty stainless-steel spokes and nickel-plated brass nipples onto our own CNC
machined billet aluminium rear hub - specifically designed to accept the OEM cush-drive assembly, and brake disc/ABS sensor components.
TECHNICAL SPECS
Both front and rear hubs are manufactured from 6082T6 billet aluminium alloy, and black xylan coated, for a durable finish.
SMPro rims are a high-quality extruded aluminium rim and come powder-coated in classic Gloss Black for durability and ease of touching in any scratches if they ever
occur.
Heavy-duty "Bulldog" stainless steel spokes have 60% greater tensile strength than typicial OEM specification mild-steel spokes, and benefit from inherent corrosion
resistance.
Our spoked wheels are supplied ready to fit with new bearings and seals and accept all the OEM hardware to mount the rear sprocket cush-drive assembly, brake disc
rotors and ABS sensor components. All you need is your own choice of tyres and tubes.
Rim tapes are included with each wheel.
Our rim sizes (17"x3.00 front and 17" x 4.25 rear) were chosen specifically to enhance the off-road performance and all-round ability of the 400S, and allow a wide
range of all-terrain 50/50 style tread pattern tyres to be fitted from any number of manufacturers.
Benefits of our wheel kit
• Rear hub is designed to work with the OEM cush drive and rubbers.
• Our rear hub/rim is 36 spoke pattern, much stronger and resistant to flex.
• Hubs supplied with bearings & seals.
• Both front & rear hubs designed to work with OEM discs, front & rear ABS rings and OEM screws.
• High-tensile "Bulldog" spokes are 33% larger cross section, and consequently 60% stronger tensile strength than the OEM plated mild steel spokes, plus they are corrosion-proof.
• Nipples are nickel-plated brass, again, corrosion-proof, maintenance free.
DO NOT USE ACID, OR ALKALI-BASED WHEEL CLEANERS TO REMOVE DIRT AND BRAKE DUST, AS THESE CAN CORRODE AND REMOVE THE POWDER-COATING AND TARNISH THE STAINLESS-STEEL AND NICKEL-PLATED BRASS NIPPLES. USE A PH-NEUTRAL CLEANER, OR SOAP AND WATER.
FITTING INSTRUCTIONS
LOWERING YOUR CRF...
CRF300 L/R -20mm 'SHORT' HEAVY DUTY SIDE-STAND
£74.75 GBP excl VAT
£0.00 excl VAT
£74.75 GBP excl VAT
Due to lowering the bike, a shorter side stand is often needed. If you have not already fitted an aftermarket or altered stand to suit your lowered bike we strongle reccomend that you do to avoid the bike falling on uneven surfaces.
View full details
