YAMAHA T7 SCOTTS STEERING DAMPER KIT

Shown here is the complete stabilizer kit which includes everything you need. This complete kit includes the stabilizer, Link-arm, new SUB mount/Bar mount assembly(ready for stock oversize bars), Nickel plated frame bracket, shortened steering bearing shroud, tower pin, instructions and all necessary hardware. This kit will keep the bars at the stock height.

The bar mounts are reversible to achieve 2 different mounting positions. Pos 1 emulates the stock location and pos 2 is 10mm forward of stock, both of which are normally desirable on this bike. This is a significant improvement to the stability of this big Adventure bike.

The text below this is generic text that applies to all SCOTTS SUB mounts.

To fit T7 Tenere2021 - 2023

"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with OEM handlebars or aftermarket Fat Bars.

This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation.

Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.

Scotts Part No. DS-SUB-5649